Kenmore Refrigerator Model 795 Owners Manual: A Comprehensive Guide
Welcome! This manual provides essential guidance for Kenmore 795 refrigerator owners, covering installation, operation, maintenance, and troubleshooting.
It references a 142-page service manual and various model numbers like 795.7103 and MFL6218444.
Congratulations on selecting a Kenmore 795 refrigerator! This appliance is designed to provide reliable cooling and storage for your food. This comprehensive guide, alongside the detailed 142-page service manual, will ensure optimal performance and longevity. The Kenmore 795 series encompasses various models, including 795.7103 and the Kenmore Elite MFL6218444, all sharing core functionalities but potentially differing in features.
This manual serves as your primary resource for understanding your refrigerator’s operation, from initial setup and installation to routine maintenance and troubleshooting common issues. Sears Brands Management Corporation, based in Hoffman Estates, IL, stands behind the quality and durability of this appliance. Access to online resources, such as www.kenmore.com and www.sears.com, provides additional support and information. Familiarize yourself with this guide to maximize your refrigerator’s efficiency and enjoy years of dependable service.
Model Number and Variations (795.7103, etc.)
Identifying your specific Kenmore 795 model is crucial for accessing the correct documentation and parts. While this manual covers the general 795 series, variations exist. Common model numbers include 795.7103, MFL6218444 (Kenmore Elite), and potentially others. These numbers are typically found on a label located inside the refrigerator compartment, often on the side wall or near the crisper drawers.
The model number dictates specific features, such as the presence of an ice maker or water dispenser, and influences the applicable service procedures outlined in the 142-page service manual. Variations may also affect component compatibility. Referencing the exact model number when contacting customer support or ordering replacement parts ensures accuracy. Understanding these distinctions allows for targeted troubleshooting and efficient maintenance, maximizing your refrigerator’s performance.
Safety Precautions and Warnings
Prioritize safety when installing and operating your Kenmore 795 refrigerator. Electrical hazards are present; ensure proper grounding and avoid using extension cords. Disconnect power before cleaning or performing maintenance. Refrigerant handling requires qualified technicians due to potential environmental and health risks – do not attempt self-repair of sealed components.
Caution: Do not store flammable materials inside the refrigerator. Keep ventilation openings clear to prevent overheating. Supervise children around the appliance. Improper use could lead to injury or damage. Refer to the full service manual (142 pages) for detailed safety guidelines. Always follow local regulations regarding appliance disposal. Ignoring these warnings may void your warranty and compromise safety.
Refrigerator Setup and Installation
Proper installation is crucial for optimal performance. This section details unpacking, space requirements, electrical connections, and instructions for door/handle adjustments.
Unpacking and Initial Inspection
Carefully unpack your new Kenmore 795 refrigerator, ensuring you have ample space to maneuver. Begin by removing all external packaging materials, like cardboard and plastic wrap. Inspect the refrigerator thoroughly for any visible signs of shipping damage – dents, scratches, or broken parts.
Check all included accessories against the packing list; this includes shelves, drawers, ice maker components (if equipped), and the water filter (if applicable). Report any missing or damaged items to the retailer immediately. Before plugging in the appliance, remove any internal packing materials, tape, or protective films.
Ensure the refrigerator is stable and level on the floor. Adjust the leveling feet as needed to prevent wobbling. Finally, clean the interior with a mild detergent and warm water before loading with food. Retain the packaging for potential warranty claims or returns.
Installation Requirements (Space, Electrical)
Proper installation is crucial for optimal performance. Allow for adequate space around the Kenmore 795 refrigerator: at least 1 inch on each side, and 2 inches at the top and rear for proper ventilation. Avoid placing the refrigerator near heat sources or in direct sunlight.
Electrical requirements typically involve a dedicated 115V, 60Hz, 15-amp circuit. Do not use extension cords; plug the refrigerator directly into a grounded outlet. Ensure the outlet is easily accessible for servicing. Verify the voltage matches the refrigerator’s specifications, found on the model plate.
Consider the floor’s weight-bearing capacity, as a fully loaded refrigerator can be quite heavy. A level floor is essential for stable operation and to prevent strain on the compressor. Consult a qualified electrician if you have any concerns about your electrical system;
Removing and Replacing Doors/Handles
Door removal requires careful attention. Begin by emptying the refrigerator and freezer compartments. Locate and unscrew the hinge bolts securing the doors. Support the door during removal to prevent damage. Reinstallation involves reversing this process, ensuring proper alignment of the hinges for a tight seal.
Handle replacement is generally straightforward. Locate the screws attaching the handles to the doors. Unscrew and remove the old handles. Align the new handles with the mounting holes and secure them with the screws. Ensure the handles are firmly attached and do not wobble.
Consult the service manual (142 pages) for detailed diagrams and specific instructions related to your Kenmore 795 model. Improper installation can affect the refrigerator’s efficiency and appearance.
Operating Your Kenmore 795
Enjoy optimal performance! This section details temperature controls, ice maker usage (if equipped), and water filter replacement procedures for your Kenmore 795 refrigerator.
Temperature Control Settings (Freezer & Refrigerator)
Adjusting Temperatures: Your Kenmore 795 refrigerator features separate temperature controls for both the freezer and refrigerator compartments. These controls, typically dials or digital displays, allow you to customize the cooling levels to suit your needs.
Refrigerator Settings: Begin with a mid-range setting (often marked as “Normal” or “3”). Allow 24 hours for the refrigerator to stabilize before making further adjustments. Lower settings are colder, ideal for storing delicate items, while higher settings are warmer for everyday use.
Freezer Settings: Similarly, start with a mid-range freezer setting. The optimal freezer temperature is 0°F (-18°C) to maintain food quality and prevent freezer burn. Monitor the freezer temperature with a thermometer to ensure it remains consistent. Avoid setting the freezer too cold, as this can waste energy.
Important Note: Frequent adjustments can impact performance. Allow sufficient time between changes to observe the effects on food preservation.
Using the Ice Maker (If Equipped)
Initial Setup: If your Kenmore 795 model includes an ice maker, ensure the water supply is connected and the ice maker is switched “On.” It typically takes 24-48 hours for the ice maker to begin producing ice. Discard the first few batches of ice to flush the system.
Ice Production: The ice maker automatically produces ice when the freezer temperature is sufficiently cold and the ice bin isn’t full. An ice maker “Off” switch may be present for temporary shutdown, like during extended vacations.
Ice Bin: Regularly check and empty the ice bin to prevent ice from melting and refreezing, which can lead to clumping. Avoid overfilling the bin.
Troubleshooting: If ice production is slow or stops, check the water supply line for kinks or freezing. Refer to the troubleshooting section for further assistance.
Water Filter Replacement (If Equipped)
Importance of Replacement: Regularly replacing the water filter in your Kenmore 795 refrigerator ensures clean, fresh-tasting water and ice. It’s recommended to replace the filter every six months, or more frequently if water quality is poor. Using a genuine Kenmore replacement filter is advised for optimal performance.
Locating the Filter: The water filter location varies by model, but is typically found inside the refrigerator compartment, often in the upper right corner or at the base of the unit. Consult your specific model’s diagram.
Replacement Procedure: Turn off the water supply before replacing the filter. Gently twist and remove the old filter, following the directional arrows. Install the new filter, aligning it correctly and twisting until secure. Flush the system by dispensing several gallons of water.
Maintenance and Cleaning
Regular upkeep is vital for your Kenmore 795. This includes interior/exterior cleaning, defrosting (manual or auto), and bulb replacement for optimal performance.
Cleaning the Interior and Exterior
Maintaining a clean refrigerator ensures food safety and extends the appliance’s lifespan. For interior cleaning, always disconnect power. Remove all shelves and drawers, washing them with warm, soapy water; rinse thoroughly and dry.
Wipe down the interior surfaces with a baking soda solution (1 tablespoon baking soda to 1 quart of water) to neutralize odors. Avoid abrasive cleaners, as they can damage the plastic.
The exterior can be cleaned with mild dish soap and warm water. Stainless steel surfaces may require a stainless steel cleaner for best results.
Pay attention to door gaskets, ensuring they are clean and free of debris to maintain a proper seal. Regularly cleaning spills immediately prevents staining and odor buildup.
Defrosting Procedures (Manual or Automatic)
Understanding your Kenmore 795’s defrost system is crucial for optimal performance. While some models feature automatic defrost, others require manual defrosting. To determine your model’s type, consult the full service manual (142 pages) for specific instructions.
For manual defrost, disconnect power and remove all food items. Leave the doors open to allow ice buildup to melt. Place towels inside to absorb water. Never use sharp objects to chip away ice, as this can damage the refrigerator lining.
Automatic defrost models cycle periodically, preventing significant ice accumulation. If you notice excessive frost, ensure the door seals are intact and the refrigerator isn’t overloaded, hindering airflow.
Replacing the Light Bulb
Maintaining visibility inside your Kenmore 795 refrigerator is simple with a quick light bulb replacement. Always disconnect the refrigerator from the power outlet before attempting this task to prevent electrical shock. Locate the light bulb, typically found within the refrigerator compartment, often near the top or side.
Gently remove the cover protecting the bulb – it may twist or snap off. Note the bulb type (incandescent or LED) for a proper replacement. Unscrew the old bulb and install the new one, ensuring it’s securely fitted; Replace the cover.
Refer to the comprehensive 142-page service manual for detailed diagrams specific to your 795 model. If the new bulb doesn’t illuminate, double-check the connection and power supply.
Troubleshooting Common Issues
Addressing problems with your Kenmore 795 is often straightforward. This section details solutions for cooling failures, ice maker malfunctions, and water dispenser concerns.
Refrigerator Not Cooling
If your Kenmore 795 refrigerator isn’t cooling, several factors could be at play. First, verify the temperature controls are set correctly for both the freezer and refrigerator compartments – ensure they haven’t been accidentally adjusted.
Next, check the condenser coils, located typically on the back or bottom of the unit. Dust and debris accumulation restricts airflow, hindering cooling efficiency. Clean them thoroughly with a vacuum cleaner brush attachment.
Inspect the door seals for any gaps or damage. A compromised seal allows warm air to enter, forcing the refrigerator to work harder. Ensure proper door closure. Finally, if the issue persists, the problem might involve the compressor, starter relay, or refrigerant levels, requiring professional service. Refer to the 142-page service manual for detailed diagnostics.
Ice Maker Problems
Experiencing issues with your Kenmore 795’s ice maker? Begin by confirming the ice maker is actually turned ‘on’ – a simple oversight is common. Check the water supply line connected to the refrigerator; ensure it’s not kinked or frozen, and the water supply valve is fully open.
Inspect the ice maker’s fill valve for blockages or malfunctions. A clogged valve prevents water from reaching the ice mold. Verify the freezer temperature is sufficiently cold (typically around 0°F) for proper ice production.
If ice cubes are small or misshapen, the water pressure might be low. For more complex issues, like a malfunctioning ice maker module, consult the 142-page service manual for diagnostic procedures and potential component replacement instructions.
Water Dispenser Issues
Encountering problems with the water dispenser on your Kenmore 795? First, confirm the water supply is connected and the shut-off valve is fully open. Check the water filter – a clogged filter is a frequent cause of reduced water flow. Replace it according to the manufacturer’s recommendations.
Inspect the water line running to the dispenser for any kinks or freezing. Low water pressure from your home’s plumbing can also limit water flow. Listen for unusual noises when dispensing; this could indicate a failing valve.
If the dispenser still doesn’t work, the dispenser switch or the water inlet valve might be defective. Refer to the comprehensive 142-page service manual for detailed troubleshooting steps and component testing procedures.
Service and Repair Information
Accessing the detailed 142-page service manual is crucial for qualified technicians. It contains service codes, diagnostic procedures, and refrigerant component information for the Kenmore 795.
Accessing the Service Manual (142 Pages)
Locating the comprehensive 142-page service manual for your Kenmore 795 refrigerator is vital for professional repairs and in-depth diagnostics. Several online resources list this manual, often identified alongside Whirlpool models due to shared components.
These resources include document repositories where the manual is available as a PDF download. Searching specifically for “Kenmore 795 Refrigerator Service Manual” will yield relevant results. Be aware that multiple listings exist, sometimes categorized with Whirlpool model numbers like W103t33dls or similar.
The manual provides detailed schematics, troubleshooting guides, parts lists, and diagnostic flowcharts essential for qualified technicians. It’s a crucial resource for understanding the refrigerator’s complex systems and performing effective repairs. Remember, attempting repairs without proper knowledge can be dangerous and void warranties.
Understanding Service Codes & Diagnostics
The Kenmore 795 refrigerator’s service manual (142 pages) details diagnostic procedures and potential service codes. While specific codes aren’t readily available without the manual, understanding the diagnostic approach is key. Technicians utilize flowcharts to pinpoint issues, starting with basic checks like power supply and temperature settings.
Common diagnostic areas include the compressor, condenser fan motor, evaporator fan motor, defrost system, and control board. The manual provides resistance values and voltage readings for various components, aiding in identifying faulty parts.
Fast Track Troubleshooting guides, often associated with this model, offer quick diagnostic steps. However, a thorough understanding of refrigeration cycles and electrical principles is crucial for accurate diagnosis and repair. Caution: Attempting complex diagnostics without proper training is not recommended.
Refrigerant Regulation and Components
The Kenmore 795 refrigerator utilizes a sealed refrigeration system containing refrigerant to transfer heat. Key components include the compressor, condenser, evaporator, and expansion device (capillary tube or orifice). The compressor circulates the refrigerant, while the condenser releases heat.
The evaporator absorbs heat from inside the refrigerator, cooling the air. The expansion device regulates refrigerant flow, controlling the cooling rate. One user speculated the system regulates freezer and fridge cooling separately, though confirmation requires the service manual.
Important Note: Refrigerant handling requires EPA certification due to environmental regulations. Do not attempt to service the sealed system yourself. Leaks or improper handling can damage the environment and void the warranty. Refer to a qualified technician for any refrigerant-related issues.
Technical Specifications
Detailed specifications, including dimensions, capacity, electrical requirements, and energy consumption, are crucial for proper installation and operation of your Kenmore 795 refrigerator.
Dimensions and Capacity
Understanding the physical specifications of your Kenmore 795 refrigerator is vital for ensuring a proper fit within your kitchen space and maximizing its storage potential. While specific dimensions vary slightly depending on the exact model number (such as 795.7103 or related MFL series), general guidelines apply.
Typical overall dimensions include height, width, and depth, crucial for navigating doorways and fitting comfortably against walls. Internal capacity, usually measured in cubic feet, dictates the amount of refrigerated and frozen storage available. This capacity is divided between the refrigerator compartment, freezer section, and potentially, dedicated spaces like crisper drawers or door bins.
Refer to the detailed specifications within the 142-page service manual or the user manual (Kenmore_795-71022.010_Refrigerator_User_Manual) for precise measurements related to your specific Kenmore 795 model. Accurate dimensions prevent installation issues and ensure optimal appliance performance.
Electrical Requirements
Ensuring correct electrical connection is paramount for the safe and efficient operation of your Kenmore 795 refrigerator. This appliance typically requires a standard 120-volt, 60Hz AC electrical supply. A dedicated, grounded circuit is strongly recommended to prevent overloading and potential electrical hazards.
The refrigerator’s power consumption, detailed in the technical specifications and the comprehensive 142-page service manual, will indicate the amperage draw; Avoid using extension cords whenever possible; if absolutely necessary, use a heavy-duty extension cord rated for the appliance’s amperage.
Always verify that the voltage matches the refrigerator’s requirements before plugging it in. Improper voltage can cause damage and void the warranty. Consult a qualified electrician if you have any concerns regarding your electrical system or the refrigerator’s power needs.
Energy Consumption
Understanding your Kenmore 795’s energy usage is crucial for efficient operation and minimizing electricity costs. While specific energy consumption figures vary based on usage patterns and model variations (like 795.7103), the detailed 142-page service manual provides precise kilowatt-hour (kWh) ratings.
Factors influencing energy consumption include ambient temperature, door opening frequency, and temperature settings. Maintaining optimal temperature settings – not excessively cold – and ensuring proper door seals contribute to energy savings.
Regularly cleaning the condenser coils, located at the back or bottom of the refrigerator, improves efficiency by allowing for better heat dissipation. Refer to the maintenance section for cleaning instructions. Comparing energy usage with similar models can help assess performance and identify potential issues.